Datacap Logo

Download / NETePay Options / NETePay Classic – Processors / Truist / BB&T / NETePay Truist Host EMV – VRH – Rental / SAAS

NETePay Truist Host EMV - VRH - Rental / SAAS

Please follow the steps below to complete your installation of NETePay Truist Host EMV – VRH – Rental / SAAS

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.76

Release date: 02/12/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.76

  • Support was added for PAX A3700 device.  
  • For PAX devices configured for EMV Debit Only, the contactless CVM limit is now set to zero causing a PIN prompt to occur when a Debit card is tapped regardless of the amount.  
  • For Verifone P400, P200 and M400 devices, this version explicitly enables the U01 command – external AID selection.  The previous version,1.75, disables external AID selection.  If a merchant supports Credit and Debit and a chip card includes both a Debit and Credit AID, then the card holder will be prompted with two application labels to choose between.  We cannot display “Select Debit?” like Ingenico and PAX devices.  If the POS sends a transaction with <CardType>Credit</CardType> (demands credit) or sends a transaction with <CardType>Debit<CardType> (demands debit), then external AID selection allows the specific AID to be chosen automatically without the cardholder being prompted with one or more application labels. 
  • Pre-dip functionality was added for PAX devices.  DDT-1292. The normal EMV transaction is split into two parts where the first part involves only collecting the card data and the second part involves processing a payment using the card data previously stored.  A new method (function call) is added called CollectCardData. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.90

Release date: 02/12/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.91

  • Support was added for the PAX A3700 devices. The A3700 device supports Credit, Debit, EBT and PrePaid.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for an older version?

Step 2

Install NETePay Truist Host EMV - VRH 5.08.50 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/25/2023

  • New features added for eCommerce include:
    • Support for Level III data. Level II data must be sent when Level III is provided.
    • Card On File support is added for Recurring and Installment transactions.
    • ApplePay and GooglePay in-app support was added.

  • Support is added for Payment Facilitators (PayFac) for Hosted. For a PayFac sub-merchant, additional ID and demographic information can be added to a stage file on PSCS. This information will be included in host messaging for all payment requests.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.08.50 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.39 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 06/22/2022

  • Support was added for the PAX IM30. 

  • The latest libraries are included for Store and Forward, Local Batch Reporting, etc.

  • When a surcharge is amount is $0, NETePay no longer sends the surcharge field to TSYS

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.39 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.38 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 04/04/2022

  • The latest Public Keys (CAPKs) were included in this version of NETePay. CAPKs are sent to dsiEMVUS when any EMV device is loaded.

  • Purchase Card Level 2 data is now supported for SaleByRecordNo transactions.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.38 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.37 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 09/02/2021

  • An EMV certification was completed for PAX devices. EMV Contact and Contactless were certified for all card brands. PAX currently does not support contactless for JCB and UnionPay cards. The certification was completed with Voltage PAN encryption. The TSYS Version ID sent in the <A42> tag is “H521” for this version of NETePay.

  • A change is made for EBT to return both the Food stamp and Cash balances when both are returned in the response from TSYS. Example balance response tags for an EBT Cash transaction include: 
    • <Balance>1234.56</Balance>
    • <FoodBalance>6543.21</FoodBalance>
    • <CashBalance>1234.56</CashBalance>

  • For eCommerce merchants, the <A32> tag to indicate an eCommerce transaction is now sent on all Voids.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.37 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.36 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 03/31/2021

  • An EMV certification was completed for the IDTech VP3300 device. Contactless support was certified for this project. All certification testing used a clear IDTech device. IDTech does not support Voltage TEP2 which is typically used when certifying new devices to TSYS.

  • A change is made to send “000” in the amount field for EBT Balance inquiry transactions. This change is required because TSYS introduced a bug for Balance transactions. We have since learned that TSYS will be fixing the bug by 4/16/21 which will allow older versions of TSYS NETePay to successfully process EBT Balance Inquiry transactions.

  • This version is built with the latest Store & Forward library (8.20). Version 8.20 includes a fix for Incremental Auth transactions when interwoven with multiple transaction sequences of PreAuth, Incremental Auth, Partial Reveral and PreAuthCapture. Each sequence is now forwarded in order, regardless of how the transactions were stored originally.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.36 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.35 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 09/23/2020

  • An EMV certification was completed with the Verifone P400 PIN pad. All card brands were certified supporting contact and contactless. All certification testing used a P400 with a Datacap TDES DUKPT PAN key with transactions routed through the TSYS MM NETePay running in Test at Azure. dsiEMVUS does not support a P400 device with clear card data. Verifone does not support Voltage TEP2 which is typically used when certifying new devices to TSYS. In this case, the P400 must be used in the NETePay Hosted environment when sending transactions to TSYS.

  • Card On File functionality is supported at this version. This application does support the eCommerce merchant category.

  • Debit Only EMV Support is added at this version. This is for the Cannabis market. The implementation is identical to First Data Rapid Connect where Debit Only is also an option.

  • For Purchase Card Level 2, Tax options of “NoTax” and “Exempt” are now supported. Previously, only a non-zero tax amount was supported for Purchase Card level 2.

  • TSYS Host-Based Multi-Merchant is also available for use on the NETePay Hosted gateway.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.35 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.34 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 09/10/2019

  • Support is added for EMV PreAuth, PreAuth and PreAuthCaptureByRecordNo. For a PreAuth, TSYS is sent a purchase transaction with a “HOLD”. If a merchant is a “hold capture participant” then NETaPay can include a “HOLD” tag in the authorization request. Including this authorization tag prevents the transaction from being captured and settled. For PreAuthCaptureByRecordNo, an adjustment transaction with the Reference Number is sent to TSYS with a “CAPTURE”. This will cause the held authorization to be released and will be captured during the next batch close. Note: If a merchant is not a “hold capture participant” and a “HOLD” tag is sent to TSYS, the host will reject the transaction and respond with “Not Allowed”.

    If an Incremental Auth or Partial Reversal has been run following a PreAuth, then the amount captured must be exactly the final authorized amount. The final capture cannot have an additional TIP added or the purchase amount reduced.

    Following the initial PreAuth, a TIP can be added to the capture. Also, following the initial PreAuth, a lesser purchase amount can be captured as long the <OriginalAuthorized> amount is sent with the capture.

    The Batch Summary and Batch Close responses from TSYS reflect totals of transactions authorized, not settled. If a transaction is captured in a subsequent batch (the “HOLD” is removed), then the totals returned by the Batch Summary and Batch Close will not match the amount settled. If all transactions are captured prior to the Batch Close, then the totals returned by the Batch Summary and Batch Close will match the amount settled.

  • The latest Store and Forward library is released with this version. Version 5.0 library prevents storing a transaction offline while an SAF_ForwardAll is in progress.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.34 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.33 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 06/18/2019

  • An EMV card brand certification was completed for the ID Tech Augusta device. For TSYS, this device collects clear card data. No card data encryption is enabled. This device supports swipe and chip only. dsiPDCX currently supports this device. 

  • Store and Forward functionality is enhanced to allow an IncrementalAuthByRecordNo and PartialReversalByRecordNo to be stored offline and later forwarded.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.33 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.32 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 02/18/2019

  • An EMV card brand certification was completed for Ingenico Tetra devices. These include the Lane/3000, 5000, 7000 and 8000. It also includes the Move/3500, Move/5000 and Link/2500. The latest client controls (dsiPDCX and dsiEMVUS) support these devices with clear card data and with Ingenico Voltage card data encryption.

  • The EMV Support parameter now includes a choice for “Credit and Debit – Prefer Debit”. This feature pertains to Ingenico device. If a card is inserted that includes a US Common Debit AID, that AID is preferred over any other AID on the card and is used for the transaction. The card would typically require a valid PIN for an approval.

  • Support is added for “81” China Union Pay cards. The latest BIN range for China Union Pay cards is used at this version.

  • Support is add for EMV contactless for Ingenico devices.

  • Support is added for Incremental Authorization and Partial Reversal. The normal flow for a bar tab using these transactions would be to start with a PreAuth, then perform one or more Incremental Authorizations and finally perform one Partial Reversal so that the exact amount authorized is settled. The final step would be to perform a PreAuthCapture for the settlement amount. This would be the flow for Worldpay IP (Mercury) or Heartland. For TSYS, PreAuth and PreAuthCapture are not supported. For TSYS, the ISV must start with a Sale. The next step is to perform one or more Incremental Authorizations. Finally, perform one Partial Reversal so that the exact amount authorized is settled. The Sale is already captured, so the final amount will settle.

  • Support is added for a amount field. For TSYS, this field is informational only. It applies to Visa, Mastercard and Discover.

  • Support is added for Local Batch Inquiry.

  • Support is added for ReturnByRecordNo.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.32 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.31 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 05/07/2017

  • The following changes are made related to store and forward processing:
    • The SAF_ForwardAll operation will now recover if communication failures occur during the forwarding process. An error will be returned along with the number of transactions that have completed forwarding. A subsequent SAF_ForwardAll will pick up where the previous one left off.
    • If there are no transactions to forward, a SAF_ForwardAll operation will now return SUCCESS along with zero totals.
    • The SAF Totals now include a count of Uncaptured PreAuth requests. All PreAuth transactions should be captured prior to forwarding stored transactions. There is no way to be paid for a forwarded PreAuth that was not captured.
    • There is a purchase amount limit parameter set on PSCS and a purchase limit sent in from the POS. The smaller of the two is compared to the transaction purchase amount. If the transaction purchase amount is less than or equal to the smaller of the two limits, then the transaction can possibly be stored offline. Otherwise, the transaction will go online.
    • There is a maximum stored transaction limit set on PSCS and a stored transaction limit sent in from the POS. The smaller of the two is compared with the current number of stored transactions. If the addition of one more transaction would keep the number of stored transaction under or equal to the smaller of the two limits, then the transaction can possibly be stored offline. Otherwise, the transaction will go online.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.31 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.30 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 02/01/2018

  • Support added for NETePay 5 Director.

  • For the “EMV Support” parameter in PSCS, the choices now include:
    • None
    • Credit
    • Credit and Swiped PIN Debit
    • Credit and EMV Debit

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Truist Host EMV – VRH 5.07.30 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Truist Host EMV - VRH 5.07.20 - Rental

NETePay Truist Host EMV - VRH 5.07.20 - Rental

Release date: 10/25/2017

  • PA-DSS 3.2

  • Support for Ingenico EMV unattended devices is added. This includes the iUC285 and iUP250 devices.

  • Store and Forward is added. This is an optional feature that must be enabled via PSCS and requires integration changes.

  • Local Batch Reporting data storage is added. This is an optional feature that must be enabled via PSCS. Data can be viewed using the Local Batch Report Viewer.

  • Suport for Auto-Updates.

  • For SaleByRecordNo transactions, the value of the <A32< Moto/eCommerce indicator is now “7” for eCommerce or “1” otherwise. For previous versions,the value was a space when not eCommerce.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay Truist Host EMV - VRH 5.06.15 - Rental

NETePay Truist Host EMV - VRH 5.06.15 - Rental

Release date: 05/18/2017

  • Support for eCommerce merchant category

  • Support for a new Adjust transaction was added
    • The new Adjust transaction is used to adjust the purchase amount downward after the original Sale. The trigger for the new Adjust transaction is the <OriginalAuthorized> amount tag. If an Adjust (or AdjustByRecordNo) transaction includes the <OriginalAuthorized> amount and the total amount is less than the original authorized amount, then the new TSYS Adjustment transaction is performed to adjust the transaction amount downward. Without the <OriginalAuthorized> amount tag, an Adjust transaction will simply adjust the TIP amount as for previous releases.

  • Support for Pay At The Table (PATT) server (This functionality is currently only available via closed beta)

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 3

Install Administrative tools (optional)

Local Batch Report Viewer 1.03

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.