Download / NETePay Options / NETePay Classic – Processors / FDMS Rapid Connect Host / NETePay FDMS Rapid Connect Host EMV – RRH – Rental
Please follow the steps below to complete your installation of NETePay FDMS Rapid Connect Host EMV – RRH – Rental
In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.
Release date: 07/18/2024
Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.
For information on supported devices please see our Compatible devices page.
Release notes for v1.79
Support was added for the PAX A6650 device.
PAX EMV Configurations for Credit with Preferred Debit is modified setting the contactless CVM limit to zero for all Debit AIDs. This will result in PAX devices prompting for an Online PIN for all contactless Debit transactions.
For all Ingenico devices, PIN Bypass is now disabled for contactless transactions for Amex, Mastercard and UnionPay. Bypassing the PIN causes a cryptogram validation error because of a change to the TVR.
For IDTech NEO2 devices (VP6800 and VP6300) the firmware version check is removed. Different models have different firmware versions.
11 Pro / 10 Pro / Server 2019 / Server 2016
OR
Release date: 07/18/2024
Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.
Release notes for v1.94
Support was added for the PAX A6650 device. The A6650 devices support Credit, Debit, EBT and PrePaid.
11 Pro / 10 Pro / Server 2019 / Server 2016
OR
Release date: 09/01/2011
Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.
11 Pro / 10 Pro / Server 2019 / Server 2016
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 08/08/2023
Support is added for the EBT SNAP Healthy Incentive Program (HIP). HIP is a California program. For EBT SNAP HIP transactions, an ISV can send a new amount field in XML tag <HealthyIncentive>. When sending the new XML tag in the request, Rapid Connect will return two new HIP amounts in the response. The two response fields include …
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.08.50 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 01/12/2023
Support is added to enable additional merchant accounts.
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.38 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 09/01/2021
Release to coincide with PAX EMV certification. Also RefNo is now truncated to right 12 characters for check transactions.
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.37 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 04/01/2021
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.36 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 12/10/2019
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.35 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 10/10/2019
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.34 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 01/17/2019
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.33 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 06/12/2018
The Local Batch Reporting feature is enhanced to record information on declines and errors on a daily basis. The Local Batch Report Viewer now includes a new tab for Declines and Errors providing a way to view and print declines and errors. The information presented includes the time, the transaction status, the decline or error message, if the decline occurred when forwarding the transaction as part of store and forward, the card type, the transaction code, the account source, the purchase amount, the gratuity amount, the cash back amount, the invoice number, the reference number and the operator ID.
New build released 10/2/18 – Change made to store and forward logic to fix an issue where transactions that should have been stored were forced online instead.
New build released 1/17/19 – Zero padding of eWIC item UPC/PLU removed.
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.32 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 04/16/2018
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.31 – Rental (⚠ non-director installs do not support remote updates)
NETePay Director provides a simplified installation process with go-forward remote software updates.
Release date: 01/31/2018
11 Pro / 10 Pro / Server 2019 / Server 2016
Or download NETePay FDMS Rapid Connect Host EMV – RRH 5.07.30 – Rental (⚠ non-director installs do not support remote updates)
Release date: 09/11/2017
11 Pro / 10 Pro / Server 2019 / Server 2016
Release date: 05/05/2017
11 Pro / 10 Pro / Server 2019 / Server 2016
Release date: 02/03/2017
Support added for…
11 Pro / 10 Pro / Server 2019 / Server 2016
Release date: 09/12/2016
11 Pro / 10 Pro / Server 2019 / Server 2016
Release date: 05/06/2016
A new “EMV Cardholder Verification” parameter is added to this NETePay where the choices are “All CVMs”, “Signature” or “None”. “All CVMs” is the default on PSCS and includes Online PIN, Offline PIN, Signature and No CVM. This setting in NETePay determines the “EMV Terminal Capabilities” setting stored in the PIN pad during an EMV Param Download operation. If this parameter is changed in NETePay, then an EMV Param Download should be run at each workstation where a PIN pad is attached.
11 Pro / 10 Pro / Server 2019 / Server 2016
Release date: 12/10/2015
Initial release supporting US EMV transactions as well as non-EMV transactions.
11 Pro / 10 Pro / Server 2019 / Server 2016
Release date: 05/11/2020
Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.
Release notes for v1.03
11 Pro / 10 Pro / Server 2019 / Server 2016
100 New Britain Blvd.
Chalfont, PA 18914
Phone: 215-997-8989
E-mail: sales@dcap.com
Hours of operation:
Monday – Friday 8:30am to 5:30pm EST
Datacap supports regulatory best practices in ADA and EMV with support of the Kiosk Industry Group and the Kiosk Association (KMA). The KMA works directly with the U.S. Access Board and is a participating organization with PCI SSC.
All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.
To view the full EULA, click here.