Datacap Logo

Download / NETePay Options / NETePay Classic – Processors / FDMS Rapid Connect Host / NETePay FDMS Rapid Connect Host EMV – RCH

NETePay FDMS Rapid Connect Host EMV - RCH

Please follow the steps below to complete your installation of NETePay FDMS Rapid Connect Host EMV – RCH

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.76

Release date: 02/12/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.76

  • Support was added for PAX A3700 device.  
  • For PAX devices configured for EMV Debit Only, the contactless CVM limit is now set to zero causing a PIN prompt to occur when a Debit card is tapped regardless of the amount.  
  • For Verifone P400, P200 and M400 devices, this version explicitly enables the U01 command – external AID selection.  The previous version,1.75, disables external AID selection.  If a merchant supports Credit and Debit and a chip card includes both a Debit and Credit AID, then the card holder will be prompted with two application labels to choose between.  We cannot display “Select Debit?” like Ingenico and PAX devices.  If the POS sends a transaction with <CardType>Credit</CardType> (demands credit) or sends a transaction with <CardType>Debit<CardType> (demands debit), then external AID selection allows the specific AID to be chosen automatically without the cardholder being prompted with one or more application labels. 
  • Pre-dip functionality was added for PAX devices.  DDT-1292. The normal EMV transaction is split into two parts where the first part involves only collecting the card data and the second part involves processing a payment using the card data previously stored.  A new method (function call) is added called CollectCardData. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.90

Release date: 02/12/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.91

  • Support was added for the PAX A3700 devices. The A3700 device supports Credit, Debit, EBT and PrePaid.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for an older version?

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.08.50

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 08/08/2023

  • Support is added for the EBT SNAP Healthy Incentive Program (HIP). HIP is a California program. For EBT SNAP HIP transactions, an ISV can send a new amount field in XML tag <HealthyIncentive>. When sending the new XML tag in the request, Rapid Connect will return two new HIP amounts in the response. The two response fields include …

    • <HealthyIncentiveEarned>
    • <HealthyIncentiveEarnedThisMonth>

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.08.50 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.38

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/12/2023

Support is added to enable additional merchant accounts.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.38 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.37

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 09/01/2021

Release to coincide with PAX EMV certification. Also RefNo is now truncated to right 12 characters for check transactions.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.37 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.36

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 04/01/2021

  • A new host message certification was completed. The UMF message version supported is now 10.02. Time-out reversal testing was completed. A new Datawire Regression test was completed for TPP-ID RDA045. No new EMV device certifications are included.

  • Support is added for online Refunds.

  • For the eCommerce merchant category, support is added for Card-On-File/Recurring transactions.

  • For the eCommerce merchant category, support is added for Applepay InApp tokens.

  • This version is built with the latest Store & Forward library (8.20). Version 8.20 includes a fix for Incremental Auth transactions when interwoven with multiple transaction sequences of PreAuth, Incremental Auth, Partial Reveral and PreAuthCapture. Each sequence is now forwarded in order, regardless of how the transactions were stored originally.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.36 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.35

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 12/10/2019

  • An EMV card brand certification was completed for Ingenico Tetra devices. These include the Lane/3000, 5000, 7000 and 8000. It also includes the Move/3500, Move/5000 and Link/2500. The latest client controls (dsiPDCX and dsiEMVUS) support these devices with clear card data, with Ingenico TDES DUKPT PAN encryption and with Ingenico OnGuard PAN encryption.

  • EMV Support is added for China Union Pay.

  • Telechek “Echeck” regression testing was completed as part of this release.

  • First Data’s Validated P2PE is supported using Ingenico’s OnGuard PAN encryption. This NETePay supports a new parameter to control support for Ingenico devices enabled for OnGuard. NETePay will not allow transactions with OnGuard encryption to be processed unless “TransArmor Validated P2PE using Ingenico OnGuard” is enabled at PSCS/NETePay.

  • For EBT eWIC transactions, when an eWIC Discount is provided, NETePay no longer adjusts the authorize amount.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.35 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.34

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 10/10/2019

  • A recent EMV brand certification has been completed for Ingenico Telium devices. New for this certification is support for EMV contactless. With Ingenico Telium devices, Visa and Mastercard contactless is EMV only. Amex and Discover contactless is both MSD and EMV.

  • First Data’s Validated P2PE is supported using Ingenico’s OnGuard PAN encryption. This NETePay supports Ingenico Telium devices configured for either TDES DUKPT or OnGuard PAN encryption. OnGuard is required for First Data’s Validated P2PE. NETePay still supports devices without PAN encryption. This includes the Verifone Vx805 and Ingenico Telium devices.

  • For EBT eWIC transactions, the TxnAmt field returned by Rapid Connect is now returned as the authorized amount.

  • Rapid Connect recently added support for a POSID field to allow the point of entry to be identified uniquely. The LaneID field is now sent to Rapid Connect in this field. The POSID field is up to 4 characters.
  •  

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.34 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.33

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/17/2019

  • EMV Support “Debit Only” option. When EMV Support is set to “Debit Only”, the EMV Param Download function will cause only Debit AIDs to be loaded for Visa, Mastercard and Discover. Credit AIDs will still be loaded for Amex and JCB. ISVs should send <CardType>Debit</CardType> to require Debit for all EMV payments.

  • Support is added for “81” China Union Pay cards.

  • Support is added for Local Batch Inquiry.

  • Support is added for Visa Spend Qualified Indicator. The field is passed in and included in Void and Capture/Completion transactions when available.

  • The eWIC BalancePreVal transaction is changed to an Authorization rather than a Balance Inquiry.
  • New build released 2/5/19 – Includes the following changes related to eWIC
    • Padding removed from UPCPLUData on requests. This corrects an issue where padding results in the wrong UPC/PLU length being communicated to the eWIC processor.
    • eWIC item unloading changed to account for padded UPCPLUData returned by Rapid Connect.
    • BalancePreVal TranCode now sends and Authorization transaction to Rapid Connect instead of BalanceInquriy. This ensures the current eWIC processing code is sent for a balance which proceeds a sale/capture.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.33 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.32

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 06/12/2018

The Local Batch Reporting feature is enhanced to record information on declines and errors on a daily basis. The Local Batch Report Viewer now includes a new tab for Declines and Errors providing a way to view and print declines and errors. The information presented includes the time, the transaction status, the decline or error message, if the decline occurred when forwarding the transaction as part of store and forward, the card type, the transaction code, the account source, the purchase amount, the gratuity amount, the cash back amount, the invoice number, the reference number and the operator ID.

  • New build released 8/8/18
    • Support is added for the following transactions.
      • FSASaleByRecordNo
      • ReverseFSASaleByRecordNo
      • EBT EWIC ReverseSaleByRecordNo
    • Support is added for an EBT EWIC Discount amount. The Discount amount should be sent in the amount tag . This is the total Discount amount of an EBT EWIC transaction. Rather than use the total Discount amount, all items presented may be discounted individually.
    • Support is added for a fee amount called Surcharge. The Surcharge amount should be sent in the amount tag . Rapid Connect accepts this field for the following Credit transactions: Sale, FSASale, PreAuth, AuthOnly and Return.
    • Store and Forward and Local Batch Reporting are updated to support the new transactions.

New build released 10/2/18 – Change made to store and forward logic to fix an issue where transactions that should have been stored were forced online instead.

New build released 1/17/19 – Zero padding of eWIC item UPC/PLU removed.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.32 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.31

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 04/16/2018

  • The following changes are made related to store and forward processing.
      • The SAF_ForwardAll operation will now recover if communication failures occur during the forwarding process. An error will be returned along with the number of transactions that have completed forwarding. A subsequent SAF_ForwardAll will pick up where the previous one left off.
      • If there are no transactions to forward, a SAF_ForwardAll operation will now return SUCCESS along with zero totals.
      • The SAF Totals now include a count of Uncaptured PreAuth requests. All PreAuth transactions should be captured prior to forwarding stored transactions. There is no way to be paid for a forwarded PreAuth that was not captured.
      • There is a purchase amount limit parameter set on PSCS and a purchase limit sent in from the POS. The smaller of the two is compared to the transaction purchase amount. If the transaction purchase amount is less than or equal to the smaller of the two limits, then the transaction can possibly be stored offline. Otherwise, the transaction will go online.
      • There is a maximum stored transaction limit set on PSCS and a stored transaction limit sent in from the POS. The smaller of the two is compared with the current number of stored transactions. If the addition of one more transaction would keep the number of stored transaction under or equal to the smaller of the two limits, then the transaction can possibly be stored offline. Otherwise, the transaction will go online.
      • Rapid Connect AthNtwkID is now returned as part of AcqRefData and used for subsequent Void and ChipOverride transactions.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.31 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.07.30

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/31/2018

  • PA-DSS 3.2
  • Support for Ingenico EMV unattended devices is added. This includes the iUC285 and iUP250 devices.
  • Quick Chip and PIN Bypass are supported for Ingenico devices using RBA 21 or above.
  • Support added for PreAuthByRecordNo to start a new PreAuth using a token.
  • Support is added for Telecheck ECA Full MICR and ID.
  • Store and Forward is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Local Batch Reporting data storage is added. This is an optional feature that must be enabled via PSCS. Data can be viewed using the Local Batch Report Viewer.
  • Pay At The Table is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • For the “EMV Support” parameter, the choices now include.
    • None
    • Credit
    • Credit and Swiped PIN Debit
    • Credit and EMV Debit

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay FDMS Rapid Connect Host EMV – RCH 5.07.30 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.06.16

NETePay FDMS Rapid Connect Host EMV - RCH 5.06.16

Release date: 09/11/2017

  • Support added for eCommerce merchant category.
  • POSEntryMode on EMV fallback to manual changed from “79” to “01” to resolve an issue where all keyed Visa transactions routed to Buypass were declined.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.06.15

NETePay FDMS Rapid Connect Host EMV - RCH 5.06.15

Release date: 05/05/2017

  • Support for US EMV with Ingenico Telium 2 devices (requires at least dsiEMVUS v1.14).
  • Support for the following US EMV debit AIDs (requires at least dsiEMVUS v1.09).
    • A0000000033010 – Visa Interlink
    • A0000000980840 – Visa US Common
    • A0000000042203 – US Maestro
    • A0000000043060 – Maestro
    • A0000001524010 – Discover US Common
  • Smart Updates which allows NETePay to be automatically updated to its versions most currently build.
  • Supports being run as a service. Please review this NETePay’s userguide for details on configuring this feature.
  • Parameter added to enable/disable eWIC support.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.06.14

NETePay FDMS Rapid Connect Host EMV - RCH 5.06.14

Release date: 02/03/2017

  • Support added for…

    • Alphanumeric Terminal IDs.
    • Batch Summary and Batch Close if the merchant account uses Buypass on the backend.
    • FSA transactions.
    • EBT EWIC transactions. The dsiPDCX interface specification is currently being revised to include EWIC transactions.
    • TDES DUKPT P2PE using Ingenico Telium 2 devices.The following Ingenico devices are supported by the current version of dsiPDCX 1.46 with TDES DUKPT for First Data.
      • iSC250
      • iPP320
      • iPP350
      • iCMP
      • iSC480
    • New build released 2/9/17
      • Correction to MasterCard reversal formatting
    • New build released 2/28/17
      • Allow AVS data on SaleByRecordNo
      • Map tax amount of 0.00 to NoTax
      • Response code 785 treated as approval on ZeroAuth/EMVZeroAuth

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.06.12

NETePay FDMS Rapid Connect Host EMV - RCH 5.06.12

Release date: 09/12/2016

  • Support was added for FSA transactions.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.06.11

NETePay FDMS Rapid Connect Host EMV - RCH 5.06.11

Release date: 05/06/2016

A new “EMV Cardholder Verification” parameter is added to this NETePay where the choices are “All CVMs”, “Signature” or “None”. “All CVMs” is the default on PSCS and includes Online PIN, Offline PIN, Signature and No CVM. This setting in NETePay determines the “EMV Terminal Capabilities” setting stored in the PIN pad during an EMV Param Download operation. If this parameter is changed in NETePay, then an EMV Param Download should be run at each workstation where a PIN pad is attached.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay FDMS Rapid Connect Host EMV - RCH 5.06.10

NETePay FDMS Rapid Connect Host EMV - RCH 5.06.10

Release date: 12/10/2015

Initial release supporting US EMV transactions as well as non-EMV transactions.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 3

Install Administrative tools (optional)

Local Batch Report Viewer 1.03

Release date: 05/11/2020

Local Batch Report Viewer can be used to view the locally stored batch report of Host based NETePay who support support this feature and have it enabled via PSCS.

Release notes for v1.03

  • Fix for an issue which prevented errors from the open batch being shown in the decline/error tab.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.