Datacap Logo

Download / NETePay Options / NETePay Classic – Processors / Worldpay Core (610/RAFT) / NETePay Worldpay Core (610/RAFT) Host EMV – FTH

NETePay Worldpay Core (610/RAFT) Host EMV - FTH

Please follow the steps below to complete your installation of NETePay Worldpay Core (610/RAFT) Host  EMV – FTH

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.78

Release date: 06/13/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.78

  1. During an EMVParamDownload, the PinPadMfgSerialNo is now sent to the NETePay / Bridge.  Previously, only PinPadSerialNo was sent.  PIN pads loaded in distribution are tracked via the PinPadMfgSerialNo.  This value is sent to PSCS by the in-store NETePay/Bridge to register the PIN pad.  The logic to register a PIN pad with PSCS is in the NETePay Bridge version 5.08.52. 

  2. A new request field is supported for Hosted to allow an ISV to provide a specific tax amount if the card is surchargeable. The XML tag <TaxIfSurchargeable> is now passed through dsiEMVUS if included in a payment request. The amount sent in <Tax> to the MM NETePay depends if a card is surchargeable. If a card is surchargeable and a non-zero surcharge amount is included, then the Logic Engine will use the <TaxIfSurchargeable> for <Tax> rather than the value sent in <Tax>.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.93

Release date: 05/14/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.93

  • GetPrePaidStripe was fixed for the  ID Tech VP3300 and VP8300 devices.  Unsolicited display messages are now handled for these devices that do not have a display. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for a older version?

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.08.51

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 08/17/2023

  • Support is added for a new XML tag to disable the Draft Locator. The new tag is <DraftLocator>Disallow</DraftLocator>. This requires dsiEMVUS v1.72 so that the tag will pass to NETePay.
  • A new merchant category choice is added – “Retail with PreAuth (manual close)”. For Retail, the batch typically auto-closes. This allows a Retail merchant to perform manual close when using PreAuth/PreAuthCapture.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.08.51 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.08.50

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/25/2023

  • The PAX unattended device, IM30, was recently certified for use with Worldpay Core NETePay. The IM30 will be available with the next release of dsiEMVUS.
  • Support for Level III data is added. Level II data must be sent when Level III is provided.
  • There are now two Merchant Category settings for eCommerce. The settings are:
    • eCommerce with Adjustment (Manual Batch Close)
    • eCommerce without Adjustment (Auto Batch Close)
  • NETePay generates a System Trace Audit Number (STAN) for each transaction that it sends to Worldpay. The value of the STAN is now returned by NETePay in a new XML response tag <SystemTraceAuditNo>. The next version of dsiEMVUS will pass this field back to the POS.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.08.50 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.37

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 08/04/2022

  • Support is added for Incremental Auth and Partial Reversal.  New TranCodes supported include IncrementalAuthByRecordNo and PartialReversalByRecordNo.  As with any payment service, it is OK to capture for more than was authorized (TIP included in capture), but when capturing for less than was authorized, a partial reversal should be completed prior to capture.  Certification has been completed for this feature.
  • PAX attended devices were recently certified for use with Worldpay Core NETePay.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.37 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.36

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 09/30/2020

  • For the in-store NETePay, Vantiv tokens are now supported. This includes support for SalebyRecordNo and ReturnByRecordNo transactions. Previously, follow-up ByRecordNo transactions were supported using the retrieval reference number from the original transaction. This will still be the case if a merchant account does not have tokens enabled.
  • The EMVPreAuth transaction was added at this version.
  • The Vantiv Draft Locator field is supported. This field is sent on all transactions with the value of the InvoiceNo supplied by the POS. The Draft Locator is a maximum of 11 characters.
  • A new XML field is supported called MerchantDefinedData. An ISV can send up to 75 characters of data in this tag for any transaction and Vantiv will store for later reporting. The data is sent to Vantiv in the Customer Discretionary Data field. This field is unique to the Vantiv NETePay.
  • Support for the eCommerce merchant category is added at this version. This merchant category requires that the merchant close the batch, the same as the Restaurant merchant category.
  • Card On File support is added. The implementation is the same as Worldpay IP, TSYS and Heartland.
  • When running as a Multi-Merchant NETePay on Azure, this version supports SurchargeWithLookup. If a surcharge amount is supplied and the card BIN lookup indicates the card account is not a debit card, then the surcharge amount will be added to the purchase amount of the transaction. The value of the SurchargeWithLookup field in the response will indicate if a surcharge was included in the transaction. If this field is “0.00” then the surcharge was not included. SurchargeWithLookup is supported through the PC client controls. Support will be added to the next release of the Tran EMV client app for TranCloud.
  • When running as a MM on Azure, this version supports tokenized transactions using 3DS Apple Pay in-app tokens. This is the first NETePay certified for 3DS tokenized transactions.

New build released 4/20/21 – G009 updated to properly set position 13 for debit transactions.

New build released 5/6/21 – Fix for for database schema mismatch which can occur with local batch reporting enabled.

New build released 7/1/21 – HC Adjust flag for Grocery merchant category now set to “N” same as previous releases.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.36 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.35

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 07/30/2020

The POS Entry Mode (chip, swipe, contactless, manual) is now returned in the AcqRefData field on most transaction responses. Then for any follow-up transaction like a TIP adjustment, the original POS Entry Mode is sent within the message packet to Vantiv, pulled from the AcqRefData.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.35 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.34

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 11/15/2019

  • An EMV card brand certification was completed for Ingenico Tetra devices. These include the Lane/3000, 5000, 7000 and 8000. It also includes the Move/3500, Move/5000 and Link/2500. The latest client controls (dsiPDCX and dsiEMVUS) support these devices with clear card data and with Ingenico TDES DUKPT card data encryption.
  • The EMV Support parameter now includes a choice for “Credit and Debit – Prefer Debit”. This feature pertains to Ingenico devices. If a card is inserted that includes a US Common Debit AID, that AID is preferred over any other AID on the card and is used for the transaction. The card would typically require a valid PIN for an approval.
  • Support is added for EMV Contactless transactions for Ingenico devices.
  • Support is added for China Union Pay EMV.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.34 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install Worldpay Core (610/RAFT) Host EMV - FTH 5.07.33

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 02/07/2019

  • Support is added for “81” China Union Pay cards.
  • Support is added for Local Batch Inquiry.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.33 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.32

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 06/20/2018

The Local Batch Reporting feature is enhanced to record information on declines and errors on a daily basis. The Local Batch Report Viewer now includes a new tab for Declines and Errors providing a way to view and print declines and errors. The information presented includes the time, the transaction status, the decline or error message, if the decline occurred when forwarding the transaction as part of store and forward, the card type, the transaction code, the account source, the purchase amount, the gratuity amount, the cash back amount, the invoice number, the reference number and the operator ID.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.32 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.31

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 05/02/2018

  • The following changes are made related to store and forward processing:
    • The SAF_ForwardAll operation will now recover if communication failures occur during the forwarding process. An error will be returned along with the number of transactions that have completed forwarding. A subsequent SAF_ForwardAll will pick up where the previous one left off.
    • If there are no transactions to forward, a SAF_ForwardAll operation will now return SUCCESS along with zero totals.
    • The SAF Totals now include a count of Uncaptured PreAuth requests. All PreAuth transactions should be captured prior to forwarding stored transactions. There is no way to be paid for a forwarded PreAuth that was not captured.
    • There is a purchase amount limit parameter set on PSCS and a purchase limit sent in from the POS. The smaller of the two is compared to the transaction purchase amount. If the transaction purchase amount is less than or equal to the smaller of the two limits, then the transaction can possibly be stored offline. Otherwise, the transaction will go online.
    • There is a maximum stored transaction limit set on PSCS and a stored transaction limit sent in from the POS. The smaller of the two is compared with the current number of stored transactions. If the addition of one more transaction would keep the number of stored transaction under or equal to the smaller of the two limits, then the transaction can possibly be stored offline. Otherwise, the transaction will go online.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.31 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.30

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/31/2018

  • Support added for NETePay 5 Director
  • For the “EMV Support” parameter, the choices now include.
    • None
    • Credit
    • Credit and Swiped PIN Debit
    • Credit and EMV Debit

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Worldpay Core (610/RAFT) Host EMV – FTH 5.07.30 (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.20

NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.07.20

Release date: 10/27/2017

  • PA-DSS 3.2
  • Support is added for Generic TDES DUKPT P2PE using Ingenico Telium 2 attended devices.
  • EMV Debit support is added. An EMV brand certification was completed for Ingenico devices including EMV credit and debit. Quick Chip and PIN Bypass are supported for these Ingenico devices using RBA 21 or above.
  • Support is added for EBT eWIC transactions. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Store and Forward is added. This is an optional feature that must be enabled via PSCS and requires integration changes.
  • Local Batch Reporting data storage is added. This is an optional feature that must be enabled via PSCS. Data can be viewed using the Local Batch Report Viewer.
  • Support is added for the latest Auto-Update functionality. The previous Vantiv app supported updating of the same version. With 5.07.20, updates can occur to new versions of the same application.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.06.11

NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.06.11

Release date: 02/20/2017

  • A new “EMV Cardholder Verification” parameter is added to this NETePay where the choices are “All CVMs”, “Signature” or “None”. “All CVMs” is the default on PSCS and includes Online PIN, Offline PIN, Signature and No CVM. This setting in NETePay determines the “EMV Terminal Capabilities” setting stored in the PIN pad during an EMV Param Download operation. If this parameter is changed in NETePay, then an EMV Param Download should be run at each workstation where a PIN pad is attached.
  • Support for Smart Updates which allows NETePay to be automatically updated to its versions most currently build.
  • Support for being run as a service. Please review this NETePay’s userguide for details on configuring this feature.
  • Change made to “POS entry capability code” used on EMVReturn transactions to correct an issue which resulted in “SYSTEM ERROR – CALL 239” response from Vantiv.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.06.10

NETePay Worldpay Core (610/RAFT) Host EMV - FTH 5.06.10

Release date: 11/02/2015

Enhanced to support US EMV transactions.

New build released 12/22/16 to correct the POS Capabilities on EMVReturn transactions and local duplicate checking behavior while processing EMV.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay Worldpay Core (610/RAFT) Host - FTH 5.05.05

NETePay Worldpay Core (610/RAFT) Host - FTH 5.05.05

Release date: 03/28/2014

Enhanced to support:

  • Additional Terminal ID’s (up to 10)
  • Mobile Client Support and Infinite Peripheral MSR support
  • Zero Authorization
  • Balance Inquiry on Prepaid cards

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.