Datacap Logo

Download / NETePay Options / NETePay Classic – Processors / Sterling-TSYS / NETePay Sterling US EMV (TS) Host – Rental

NETePay Sterling US EMV (TS) Host - Rental

Please follow the steps below to complete your installation of NETePay Sterling US EMV (TS) Host – Rental

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.78

Release date: 06/13/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.78

  1. During an EMVParamDownload, the PinPadMfgSerialNo is now sent to the NETePay / Bridge.  Previously, only PinPadSerialNo was sent.  PIN pads loaded in distribution are tracked via the PinPadMfgSerialNo.  This value is sent to PSCS by the in-store NETePay/Bridge to register the PIN pad.  The logic to register a PIN pad with PSCS is in the NETePay Bridge version 5.08.52. 

  2. A new request field is supported for Hosted to allow an ISV to provide a specific tax amount if the card is surchargeable. The XML tag <TaxIfSurchargeable> is now passed through dsiEMVUS if included in a payment request. The amount sent in <Tax> to the MM NETePay depends if a card is surchargeable. If a card is surchargeable and a non-zero surcharge amount is included, then the Logic Engine will use the <TaxIfSurchargeable> for <Tax> rather than the value sent in <Tax>.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016


dsiPDCX® 1.93

Release date: 05/14/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.93

  • GetPrePaidStripe was fixed for the  ID Tech VP3300 and VP8300 devices.  Unsolicited display messages are now handled for these devices that do not have a display. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016


DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for a older version?

Step 2

Install NETePay Sterling US EMV (TS) Host - VRH 5.08.50 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/25/2023

  • New features added for eCommerce include
    • Support for Level III data. Level II data must be sent when Level III is provided.
    • Card On File support is added for Recurring and Installment transactions.
    • ApplePay and GooglePay in-app support is added.
  • Support is added for Payment Facilitators (PayFac) for Hosted. For a PayFac sub-merchant, additional ID and demographic information can be added to a stage file on PSCS. This information will be included in host messaging for all payment requests.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Sterling US EMV (TS) Host – VRH 5.08.50 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Contact Tech Support for a no-charge upgrade

Fill out the form below or contact Datacap Tech Support at 215-997-8989 x143 or

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.