Datacap Logo

Download / NETePay Options / NETePay Hosted Options / NETePay Hosted Bridge EMV – DCR – Rental / SAAS

NETePay Hosted Bridge EMV - DCR - Rental / SAAS

Please follow the steps below to complete your installation of NETePay Hosted Bridge EMV – DCR – Rental / SAAS

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.79

Release date: 07/18/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.79

  1. Support was added for the PAX A6650 device.

  2. PAX EMV Configurations for Credit with Preferred Debit is modified setting the contactless CVM limit to zero for all Debit AIDs. This will result in PAX devices prompting for an Online PIN for all contactless Debit transactions. 

  3. For all Ingenico devices, PIN Bypass is now disabled for contactless transactions for Amex, Mastercard and UnionPay. Bypassing the PIN causes a cryptogram validation error because of a change to the TVR. 

  4. For IDTech NEO2 devices (VP6800 and VP6300) the firmware version check is removed. Different models have different firmware versions. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.94

Release date: 07/18/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.94

  • Support was added for the PAX A6650 device. The A6650 devices support Credit, Debit, EBT and PrePaid.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for a older version?

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.08.53 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 08/26/2024

  1. When phone home fails, NETePay now counts only Sale and Auth transactions to see how often to send a “License Warning” response.  The count of transactions is being modified on PSCS to 60 transactions.  A phone home is typically attempted every 5 hours. 

  2. If TLS communication is enabled, every heart beat NETePay now attempts a “get” to the TLS endpoint and a “get” to google.  The results are logged. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.08.53 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.08.52 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 06/11/2024

During an EMVParamDownload, NETePay now sends a message to PSCS to register the PIN pad device loaded during the download. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.08.52 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.08.51 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 03/19/2024

This version now supports a HTTPS (TLS 1.2) client for communicating to the Azure hosted environment.  There is a hidden PSCS parameter – “Use TLS” that must be enabled so that the Bridge connects via TLS rather than a typical Datacap client / server IP connection. 

The developer build uses a CERT endpoint – webroute-cert.dcap.com

The production build uses a PROD endpoint – webroute.dcap.com

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.08.51 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.08.50 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 04/07/2023

  • Support is added for a new backend processor – Priority Payments. Priority Payments supports only credit card transactions (EMV and non-EMV). The merchant categories supported include Retail, Restaurant and eCommerce. Priority Payments supports all of the basic Credit transactions except Incremental Auth, Partial Reversal, FSA Sale and Balance.
  • A new TranCode, EMVSaleWithSplit, can now pass through the Bridge. EMVSaleWithSplit is a new TranCode used to support “split” payments for the government space. This new TranCode will be documented with the next release of dsiEMVUS.
  • This version is built with the latest Store and Forward and Local Batch Reporting libraries.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.08.50 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.43 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 05/24/2022

This version is built with a new library for Local Batch Reporting.  Local Batch Reporting now stores the PayAPIId for each transaction in the local batch database.  With the PayAPIId field stored, it will now be returned when an ISV uses the BatchReportTransaction to request local transaction detail information.  The PayAPIId data is returned in a new tag <PayAPI_Id>.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.43 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.42 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 02/08/2022

Support is added for the Paynetworx backend processor.  Today, our Paynetworx multi-merchant NETePay supports only swiped PIN debit transactions.  Other than DC Direct, an integration for Paynetworx would use dsiPDCX to drive the debit PIN pad.  There is no real benefit to steering transactions through the Hosted Bridge app for Paynetworx, but it is perfectly fine to use. 

This new version of the Hosted Bridge supports current EMV CAPKs for EMV device loading.  The expired UnionPay CAPK is removed. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.42 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.41 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/06/2022

Support is added for Local Duplicate Checking.  There is a new parameter to enable the feature when building a stage file for a Hosted Bridge.  The Local Duplicate Checking implementation is identical to other in-store NETePays that support this same feature.  The Bridge stores the last 20 approval responses in memory.  When a transaction is received, if the TranCode, the last four digits of the card number, the total amount to authorize and the invoice number matches one of the stored approval responses, then the Bridge returns the response without sending the request to the gateway.  For ByRecordNo transactions, there is no card number to compare so the other three items must match. 

It is very important that ISV’s use unique invoice numbers on each transaction if Local Duplicate Checking is enabled.  AdjustByRecordNo transactions are always sent to the gateway. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.41 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.40 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 03/23/2021

Updated to use Store and Forward library – 8.20. Version 8.20 includes a fix for Incremental Auth transactions when interwoven with multiple transaction sequences of PreAuth, Incremental Auth, Partial Reversal and PreAuthCapture. Each sequence is now forwarded in order, regardless of how the transactions were stored originally.

Support for ECheck transactions added.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.40 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.39 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 12/01/2020

  • The EMV Support parameter now includes the choice for “Debit Only”. This is for the Cannabis market. The implementation is identical to TSYS and First Data Rapid Connect where Debit Only is also an option. When this option is chosen, the Visa and Mastercard credit AIDs are not loaded into the PIN pad device.
  • The PrePaid Cashout transaction is allowed to pass through the Hosted Bridge to the gateway.
  • This version is built with the latest version of the Store & Forward library (8.10) and the Local Batch Reporting library (2.30).
  • When Multiple Merchant Provisioning is available via PSCS, this version of the Hosted Bridge will allow the Merchant ID to be passed through from the POS. When Multiple Merchant Provisioning is enabled, the Merchant ID parameter will be ignored. When disabled, the Merchant ID parameter value will be sent to the gateway.

New build released 1/25/21 – Fixes issue with creation of local batch reporting database and registry alias.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.39 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.38 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 08/24/2020

New for this release is support for a new backend processor that is our Certification Simulator. The other change to this version is support for the Contactless setting with a value of “None”. This is to disable contactless for older Ingenico devices.

New build released 8/31/20 – ServerVersion <SerialNo> now returns part number of the selected NETePay Hosted back end.

New build released 10/15/20 – Local batch reporting library updated to allow an error returned from a Multi-Merchant NETePay to be recorded in the Local Batch database including the Invoice Number and other fields from the original request. Store and forward library updated to prevent storage of non-major credit transactions by bridge NETePays.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.38 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.37 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 06/04/2020

New for this release is a parameter to enable the usage of Bluefin Validated P2PE transactions. PSCS now shows a parameter “BlueFin Validated P2PE Support”. If not enabled, the Hosted Bridge will return an error indicated BlueFin Validated P2PE is not enabled.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.37 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.36 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 05/28/2020

Support added for Worldpay Core backend processor.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.36 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.35 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 04/27/2020

Support added for EVO SNAP backend processor.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.35 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Hosted Bridge EMV - DCR 5.07.34- Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/20/2020

This NETePay supports current DSIClientX, dsiPDCX and dsiEMVUS integrations. Certified EMV devices supported via dsiEMVUS for the Datacap Azure gateway include the Ingenico Telium and Tetra devices enabled for TDES or OnGuard PAN encryption. The next release of dsiEMVUS supports IDTech devices for the gateway.

Credit, Debit and EBT card transactions are supported. This application supports EMV Contact and Contactless for all card brands. It supports all EMV Cardholder Verification methods. It supports the following backend payment processors …

  • Worldpay IP (current Mercury MM server)
  • TSYS
  • First Data Rapid Connect
  • Heartland Portico
  • Worldpay TCMP Legacy
  • Chase Paymentech
  • The choices for “EMV Support” are the same as other in-store NETePays …
    • None
    • Credit Only
    • Credit and Swiped PIN Debit
    • Credit and Debit
    • Credit and Debit – Prefer Debit

Similar to other in-store NETePays, the application can be used with the Pay At The Table server. EBT eWIC transactions can be sent through to the First Data and Worldpay IP (Mercury) backends. And it supports Local Batch Reporting and Store and Forward.

In production mode, this app connects to the Datacap Azure production environment at “prod1.netepayhosted.dcap.com” or “prod2.netepayhosted.dcap.com”. A developer copy of this app connects to the Datacap Azure certification environment at “cert.netepayhosted.dcap.com”.

The software part number for the Datacap NETePay Hosted Bridge is 8730.19.

New build released 3/6/20 – The CardLookup TranCode is now allowed to pass through to NETePay Hosted.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Hosted Bridge EMV – DCR 5.07.34 – Rental (⚠ non-director installs do not support remote updates)

  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.