NETePay EVO SNAP Host - ESR - Rental

Download / NETePay Options / NETePay Classic – Processors / EVO Snap Host / NETePay EVO SNAP Host – ESR – Rental

NETePay EVO SNAP Host - ESR - Rental

Please follow the steps below to complete your installation of NETePay EVO SNAP Host – ESR – Rental

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.79

Release date: 07/18/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.79

Support was added for the PAX A6650 device.
PAX EMV Configurations for Credit with Preferred Debit is modified setting the contactless CVM limit to zero for all Debit AIDs. This will result in PAX devices prompting for an Online PIN for all contactless Debit transactions.
For all Ingenico devices, PIN Bypass is now disabled for contactless transactions for Amex, Mastercard and UnionPay. Bypassing the PIN causes a cryptogram validation error because of a change to the TVR.
For IDTech NEO2 devices (VP6800 and VP6300) the firmware version check is removed. Different models have different firmware versions.

11 Pro / 10 Pro / Server 2019 / Server 2016

dsiPDCX® 1.94

Release date: 07/18/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.94

Support was added for the PAX A6650 device. The A6650 devices support Credit, Debit, EBT and PrePaid.

11 Pro / 10 Pro / Server 2019 / Server 2016

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for a older version?

Step 2

Install NETePay EVO SNAP Host - ESR 5.07.37 - Rental

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 09/22/2021

Support is added for EVO SNAP host messaging version 2.1.36. EVO fixed an issue for EMV chip card ZeroAuth transactions.
Support is added for Incremental Authorization and Partial Reversal transactions for credit cards. One or more Incremental Auths may follow a PreAuth transaction. This can be followed by a single Partial Reversal. And finally, a PreAuthCapture is used to finalize the payment.
An EMV brand certification was completed for PAX devices. There is still a Visa Debit transaction to be run when EVO and FIS are ready.

11 Pro / 10 Pro / Server 2019 / Server 2016

User Guide

Or download NETePay EVO SNAP Host – ESR 5.07.37 – Rental (⚠ non-director installs do not support remote updates)

About NETePay Director

When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.

When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
- View Merchant Parameters
- PSCS
- Email log
- View log

Contact Tech Support for a no-charge upgrade

Fill out the form below or contact Datacap Tech Support at 215-997-8989 x143 or support@dcap.com.