Datacap Logo

Download / NETePay Options / NETePay Classic – Processors / Elavon Host / NETePay Elavon Host EMV – ELH

NETePay Elavon Host EMV - ELH

Please follow the steps below to complete your installation of NETePay Elavon Host EMV – ELH

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.78

Release date: 06/13/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.78

  1. During an EMVParamDownload, the PinPadMfgSerialNo is now sent to the NETePay / Bridge.  Previously, only PinPadSerialNo was sent.  PIN pads loaded in distribution are tracked via the PinPadMfgSerialNo.  This value is sent to PSCS by the in-store NETePay/Bridge to register the PIN pad.  The logic to register a PIN pad with PSCS is in the NETePay Bridge version 5.08.52. 

  2. A new request field is supported for Hosted to allow an ISV to provide a specific tax amount if the card is surchargeable. The XML tag <TaxIfSurchargeable> is now passed through dsiEMVUS if included in a payment request. The amount sent in <Tax> to the MM NETePay depends if a card is surchargeable. If a card is surchargeable and a non-zero surcharge amount is included, then the Logic Engine will use the <TaxIfSurchargeable> for <Tax> rather than the value sent in <Tax>.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.93

Release date: 05/14/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.93

  • GetPrePaidStripe was fixed for the  ID Tech VP3300 and VP8300 devices.  Unsolicited display messages are now handled for these devices that do not have a display. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for an older version?

Step 2

Install NETePay Elavon Host EMV - ELH 5.06.17

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 12/15/2020

The only change is to the production URL used to connect to Elavon’s public IP gateway.

Elavon put up a new public IP endpoint using the URL “prodgate02.viaconex.com”. The SSL certificate uses an Entrust root certificate. Elavon would like all Class B merchants to move to this new environment. Merchants can now upgrade to this new version of NETePay which connects to “prodgate02”.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Elavon Host EMV – ELH 5.06.17 (⚠ non-director installs do not support remote updates)
  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Elavon Host EMV - ELH 5.06.16

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/18/2018

  • Support added for NETePay 5 Director.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay Elavon Host EMV – ELH 5.06.16 (⚠ non-director installs do not support remote updates)
  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay Elavon Host EMV - ELH 5.06.11

NETePay Elavon Host EMV - ELH 5.06.11

Release date: 10/26/2017

Elavon’s URL has been changed to prodgate.viaconex.com. The new URLs support only TLS 1.2. This is important to note because all versions of Windows prior to 7 and Server 2008 R2 do not support TLS 1.2.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

NETePay Elavon Host EMV - ELH 5.06.10

NETePay Elavon Host EMV - ELH 5.06.10

Release date: 01/10/2017

  • Supports EMV Credit and EMV Debit (Visa US Debit, US Maestro, Discover Common US Debit)
    • Requires use of Verifone Vx805 running XPI 12.05.13 injected with both Elavon’s P2PE (TDES DUKPT) PAN and PIN keys.

  • Support for Mastercard “2” BIN range.

  • Supports Non-EMV transactions
    • Credit
    • Debit
    • EBT
    • E-Check

  • Tokenization support
    • SaleByRecordNo
    • VoidSaleByRecordNo
    • VoidReturnByRecordNo

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.