Verifone M400 Serial - Datacap Systems, Inc.

Verifone M400 - Serial Connection

What do I need to connect the M400?

Verifone M400
Verifone M400 serial cable
Verifone M400 power supply
Included serial cable adaptor
Included TranCloud power supply

1.) Plug included Serial Cable Adaptor into MSR/PIN Pad port on TranCloud.

Do not use the ECR/AUX Port.

2.) Plug M400 serial cable into serial cable adaptor connected to TranCloud.

3.) Connect M400 power supply to 120V power outlet and to the back of the M400 serial cable.

M 400 will turn on once it’s connected to power.

4.) Connect TranCloud to 120V power outlet using included TranCloud power supply.

5.) Press the “1”, “5”, and “9” keys at the same time to open settings.

6.) Select “Control Panel”.

7.) Select “Sysmode” .

8.) Select “supervisor”.

9.) Type the supervisor password and press the “Enter (green)” key.
This password can vary.

“1111111”
OR
“1166832”
OR
“1668321”
OR
“1686321”

10.) Select “Administration”.

11.) Select “Config Editor”.

12.) Select “config.usr1”.

13.) Select “sacom” by touching its current value.

14.) Select “Modify”.

15.) Type “COM2” (Press the CAP key for capital letters).

16.) Press the “Enter (green)” key.

17.) Press the “Cancel (red)” key 3 times to reach the Main menu.

18.) Select “Exit”.

19.) Select “Reboot”.

Company

Become a Datacap Reseller

Direct Rental Program

Solutions

White-Labeled Gateway

Compatible Devices

Supported Processors

Resources

Developer Portal

Reporting Dashboard

Merchant Parameter WS

Support Articles

Contact us

100 New Britain Blvd.
Chalfont, PA 18914

Phone: 215-997-8989
E-mail: sales@dcap.com

Hours of operation:
Monday – Friday 8:30am to 5:30pm EST

© 2024 Datacap Systems, Inc. All Rights Reserved | Privacy Policy | Terms of Use

Datacap supports regulatory best practices in ADA and EMV with support of the Kiosk Industry Group and the Kiosk Association (KMA). The KMA works directly with the U.S. Access Board and is a participating organization with PCI SSC.