Datacap Logo
Contact us
Datacap Logo

Download / NETePay Director

NETePay Director

Please follow the steps below to complete the installation of the NETePay Director

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.91

Release date: 02/05/2026

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.91

  1. PAX A6630 devices were added. New SecureDevice values are below.

  2.   Ingenico Axium devices are added supporting Bluefin decryption on Hosted. New SecureDevice values are below.

  3. Ingenico Axium “Dim” settings are now set during an EMVParamDownload.  “arc/terminal/screen/dimTimeoutSec” = 300.  “arc/terminal/screen/lockTimeoutSec” = 0 

  4. For ID TECH devices, EMV tag 5F2D (language preference) is no longer converted after receiving the value from the device. The device sends the value as Hex ASCII which is exactly how it needs to be sent to payment services. This value is not sent to all payment services.  It is sent to TSYS.


New SecureDevice values:

EMV_A6630_PAYMENTECH
EMV_A6630_VANTIV_E2E
EMV_A6630_TSYS
EMV_A6630_TSYS_VOLT
EMV_A6630_RAPIDCONNECT
EMV_A6630_RAPIDCONNECT_E2E
EMV_A6630_HEARTLAND
EMV_A6630_DATACAP_E2E
EMV_A6630_DATACAP_BLUEFIN
EMV_DX4000_DATACAP_BLUEFIN
EMV_DX8000_DATACAP_BLUEFIN
EMV_EX6000_DATACAP_BLUEFIN
EMV_EX8000_DATACAP_BLUEFIN
EMV_RX5000_DATACAP_BLUEFIN
EMV_RX7000_DATACAP_BLUEFIN

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

DOWNLOAD DSIEMVUS (.exe)

OR

dsiPDCX® 2.00

Release date: 01/21/2026

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v2.00

  1. Four new BINs are added to the whitelisted gift card BINs that dsiPDCX checks for GetPrePaidStripe and GetPrePaidStripeAllTracks.  dsiPDCX will not return clear card data unless the card BIN and card account length are allowed. The new BINs include 305720 (14 long), and 500015, 634120, 812900 (all 16 long).  There is a new PAX whitelist available that includes all of the new BINs.  There are also new whitelist files (SECBIN files) for Ingenico RBA, UPP and ARC. The Datacap Distribution Loader and Payloader are using these new whitelists. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

DOWNLOAD DSIPDCX (.exe)

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

DOWNLOAD DSICLIENTX (.exe)

Step 2

Install NETePay Director

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 08/14/2020

  • New build released 12/05/2025 – Installer removes access permissions for “Everyone” for the NETePay folder.  If the Director is currently installed and running, use the Manager to stop the Director and then exit the Manager.  Then run the new installer.
  • New build released 02/27/18 – Change made to properly close the connection between manager and director if an ePay window is being shown while manager is used to “Load Parameters [Start/Stop Director]” or “Stop Director”.
  • New build released 08/28/18 – Changes to facilitate future release of terminal capture NETePays via NETePay Director.
  • New build released 08/27/19 – Fixed an issue where failure to start director on 64 bit machine results in increased memory usage.
  • New build released 08/14/20 – New to this version is a Menu item – Software Deactivation. This feature will allow a user to deactivate the Director so that a new serial number can be obtained and a new Deployment ID can be entered.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

DOWNLOAD NETEPAY DIRECTOR (.exe)
User Guide
  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.

Go back
I Agree