Verifone M400 Serial

Verifone M400 - Serial Connection

What do I need to connect the M400?

Verifone M400
Verifone M400 serial cable
Verifone M400 power supply
Included serial cable adaptor
Included TranCloud power supply

1.) Plug included Serial Cable Adaptor into MSR/PIN Pad port on TranCloud.

Do not use the ECR/AUX Port.

2.) Plug M400 serial cable into serial cable adaptor connected to TranCloud.

3.) Connect M400 power supply to 120V power outlet and to the back of the M400 serial cable.

M 400 will turn on once it’s connected to power.

4.) Connect TranCloud to 120V power outlet using included TranCloud power supply.

5.) Press the “1”, “5”, and “9” keys at the same time to open settings.

6.) Select “Control Panel”.

7.) Select “Sysmode” .

8.) Select “supervisor”.

9.) Type the supervisor password and press the “Enter (green)” key.
This password can vary.

“1111111”
OR
“1166832”
OR
“1668321”
OR
“1686321”

10.) Select “Administration”.

11.) Select “Config Editor”.

12.) Select “config.usr1”.

13.) Select “sacom” by touching its current value.

14.) Select “Modify”.

15.) Type “COM2” (Press the CAP key for capital letters).

16.) Press the “Enter (green)” key.

17.) Press the “Cancel (red)” key 3 times to reach the Main menu.

18.) Select “Exit”.

19.) Select “Reboot”.

Verifone M400 - Serial Connection

What do I need to connect the M400?

1.) Plug included Serial Cable Adaptor into MSR/PIN Pad port on TranCloud.

2.) Plug M400 serial cable into serial cable adaptor connected to TranCloud.

3.) Connect M400 power supply to 120V power outlet and to the back of the M400 serial cable.

4.) Connect TranCloud to 120V power outlet using included TranCloud power supply.

5.) Press the “1”, “5”, and “9” keys at the same time to open settings.

6.) Select “Control Panel”.

7.) Select “Sysmode” .

8.) Select “supervisor”.

9.) Type the supervisor password and press the “Enter (green)” key. This password can vary.

10.) Select “Administration”.

11.) Select “Config Editor”.

12.) Select “config.usr1”.

13.) Select “sacom” by touching its current value.

14.) Select “Modify”.

15.) Type “COM2” (Press the CAP key for capital letters).

16.) Press the “Enter (green)” key.

17.) Press the “Cancel (red)” key 3 times to reach the Main menu.

18.) Select “Exit”.

19.) Select “Reboot”.

Company

Solutions

Login

Resources

Contact us

9.) Type the supervisor password and press the “Enter (green)” key.
This password can vary.